Filter
Top Products
This soft copy for use by IBM employees only.
STATUS mandatory
DESCRIPTION
″MaxCC as defined in the Q.2110 Specification.
This is the maximum value for the state variable
VT(CC), corresponding to the maximum number of
transmissions of a BGN, END, ER or RS PDU.″
::= { atmSaalConfEntry 10 }
atmSaalMaxPD OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″MaxPD as defined in the Q.2110 Specification.
This is the maximum iacceptable value for the state
variable VT(PD) before sending a POLL PDU and
resetting VT(PD) to zero.
This parameter is an upper limit for counter VT(PD)
that sends a POLL PDU after every (MaxPD) SD PDUs.″
::= { atmSaalConfEntry 11}
atmSaalMaxStat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″MaxSTAT as defined in the Q.2110 Specification.
This is the maximum number of list elements
placed in a STAT PDU.″
::= { atmSaalConfEntry 12}
-- This table defines the SAAL statistics.
atmSaalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSaalStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″This table contains statistics for the SAAL protocol,
for outgoing calls only.″
::= { atmSaal 2 }
atmSaalStatsEntry OBJECT-TYPE
SYNTAX AtmSaalStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″Entries of atmSaalConfTable. Each entry corresponds to a pair
of ATM interface, signalling channel.
A signalling channel is uniquely defined on each interface
by the VPI and VCI values allocated to it.″
INDEX { atmSaalStatsIndex,
atmSaalStatsSiVpi,
atmSaalStatsSiVci }
::= { atmSaalStatsTable 1 }
AtmSaalStatsEntry ::= SEQUENCE {
atmSaalStatsIndex
INTEGER,
242 ATM Workgroup Solutions: Implementing the 8285 ATM Switch