Filter
Top Products
This soft copy for use by IBM employees only.
5. The ATM LAN Bridge Module Configuration Utility will be automatically
added to the program manager.
6. The setup program will notify you when the installation is
complete.
1.3 TCP/IP SLIP Connection Setup
In order to communicate with the ATM LAN Bridge Module hardware, the Configuration
Utility uses TCP/IP via the winsock.dll. The configurator has been thoroughly
tested with the IBM versions of TCP/IP (DOS and OS/2). However it has been
demonstrated to work with the Chameleon TCP/IP protocol stack from NetManage
and Win95 from Microsoft.
*************************************************************************
*** You will need a NULL modem cable to directly attach to the bridge ***
*** using the SLIP interface. ***
*************************************************************************
End to end the cable needs the following lines:
25 pin
====== ======== ( 25 pin female
PC ‘-------------------------------• 8281 cable connector)
====== ========
---------------- -----------------
Pin Number Line Line Pin Number
3 RD ---------------------------- TD 2
2 TD ---------------------------- RD 3
7 COMMON ---------------------------- COMMON 7
9 PIN
====== ======== ( 25 pin female
PC ‘-------------------------------• 8281 cable connector)
====== ========
---------------- -----------------
Pin Number Line Line Pin Number
2 RD ---------------------------- TD 2
3 TD ---------------------------- RD 3
7 COMMON ---------------------------- COMMON 7
NULL MODEM CABLES
NOTICE: The Transmit and Receive line #′ s are reversed on the 9 and 25
connectors (on the PC side).
******************************************************************
**** IMPORTANT NOTE REGARDING - UART TYPE ****
******************************************************************
>>>NOTE: It is HIGHLY recommended that you use a workstation
that has a Type 2 UART to ensure reliable transfer of
data between the workstation and the ATM LAN Bridge Module.
If you are not sure what type of UART your machine has
SLIP will display the UART type on bringup. When SLIP
186 ATM Workgroup Solutions: Implementing the 8285 ATM Switch