Filter
Top Products
This soft copy for use by IBM employees only.
Attention
The BOOT and OPERATIONAL code load very quickly (approximately 1
minute each). However, because of extensive error-checking on the
FPGA code, it can take more than 10 minutes. Be patient.
4. Download the new microcode for any media modules installed in the 8285
Expansion Chassis by issuing the appropriate SET TFTP
SERVER_IP_ADDRESSS, SET TFTP FILE_TYPE, SET TFTP FILE_NAME, SET
TFTP TARGET_MODULE, and DOWNLOAD INBAND commands. In this case
the TARGET_MODULE number will be slot number that each card is installed
in. Be sure to check the current FPGA code first, using the SHOW MODULE
n VERBOSE (where n is the blade′s slot number).
116 ATM Workgroup Solutions: Implementing the 8285 ATM Switch