Filter
Top Products
This soft copy for use by IBM employees only.
slot/subslot is unoccupied, the timestamp indicates
the time that the module was removed. If no module
has occupied this slot/subslot since the last
restart of the agent, the value of ssTimeLastChanged
for this entry is zero.″
::= { ssLastChangedEntry 3 }
ssTimeLastChanged OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The value of SysUpTime at the time that the
last change was detected to any of the information
included in the summary table entry for this slot
and subslot. A change in the value of this object
signals the management station to re-get the
corresponding summary information.″
::= { ssLastChangedEntry 4 }
ssLastChangedSummary OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
″This object contains the value of ssTimeLastChanged for
each slot/subslot in the concentrator. The first two
octets contain the version of this object. The data
following the version begins with the first slot and
all of its sub-slots before continuing with the next slot.″
::= { staticSummary 3 }
--
-- IBM 8260 Power Group
--
-- This group is used for managing the
-- power in the IBM 8260 hub.
--
-- Hub power mode
--
ocPowerModeAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
fault-tolerant(1),
not-fault-tolerant(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″The current desired state of hub power fault-tolerant
mode. Setting this object to fault-tolerant(1) will
reserve one power supply′ s worth of power from the power
budget for fault-tolerant operation, provided sufficient
power is available. Setting this object to
not-fault-tolerant(2) returns the reserved power to the
power budget.″
::= { ocPowerControl 1 }
Appendix E. IBM ATM Campus Switch Private MIBs 265