Filter
Top Products
This soft copy for use by IBM employees only.
-- Dumps
dumps OBJECT IDENTIFIER ::= { service 2 }
-- dumps.1 intentionnally left unused
trsDump OBJECT-TYPE
SYNTAX INTEGER { ready (1),
start (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″When start is selected, a dump of the Topology and Route
Services component is taken.
The dump is stored in the hub in a file that can be
retrieved through TFTP.″
::= { dumps 2 }
-- Microcode swap
swap OBJECT IDENTIFIER ::= { service 3 }
swapControl OBJECT-TYPE
SYNTAX INTEGER { ready (1),
swap (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″When swap is selected, the backup microcode image is
checked and, if valid, activated.
The previously active microcode image becomes
the backup image.
The atm subsystem is reset.″
::= { swap 1 }
swapResult OBJECT-TYPE
SYNTAX INTEGER { not-initialized (1),
swap-successful (2),
swap-in-progress (3),
checksum-error (4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
″The result of the latest microcode swap.
When an operational code image is downloaded or
when the system is reset, swapControl becomes
not-initialized.″
::= { swap 2 }
swapBackupVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
226 ATM Workgroup Solutions: Implementing the 8285 ATM Switch