Filter
Top Products
100 Intel® Blade Server Ethernet Switch Module IXM5414E
Port GVRP Mode
Indicates whether the GVRP administrative mode for the port is Enabled or Disabled. The
factory default is Disabled.
Port GMRP Mode
Indicates whether the GMRP administrative mode for the port is Enabled or Disabled. The
factory default is Disabled.
Join Timer (centisecs)
Specifies the time between the transmission of GARP PDUs registering (or re-registering)
membership for a VLAN or multicast group in centiseconds. An instance of this timer exists
for each GARP participant for each port. Permissible values are 10 to 100 centiseconds (0.1
to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds).
Leave Timer (centisecs)
Specifies the time to wait after receiving an unregister request for a VLAN or multicast
group before deleting the associated entry, in centiseconds. This allows time for another
station to assert registration for the same attribute in order to maintain uninterrupted service.
An instance of this timer exists for each GARP participant for each port. Permissible values
are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6
seconds).
Leave All Timer (centisecs)
This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. An instance of this timer exists for each GARP
participant for each port. The Leave All Period Timer is set to a random value in the range of
LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to
60 seconds). The factory default is 1000 centiseconds (10 seconds).
Switch configuration
Use this panel to Enable or Disable GVRP and GMRP for this switch. Note: It can take up to 10
seconds for GARP configuration changes to take effect.