Filter
Top Products
Intel® Blade Server Ethernet Switch Module IXM5414E 111
Spanning Tree Admin Mode
Select Enable or Disable from the pull-down menu to specify whether spanning tree
operation is Enabled on the switch.
Force Protocol Version
Specify the version of the Spanning Tree Protocol (STP) you want the switch to use.
The options are IEEE 802.1D (standard) and IEEE 802.1w (Rapid
Reconfiguration).
Configuration Digest Key
A derived value identifying the configuration.
Click the Refresh button to update the screen with the most recent data.
Click the Apply button to send the updated screen to the switch and cause the changes to take effect
on the switch. If you want the switch to retain the new values across a power cycle you must perform
a save.
Common Spanning Tree (CST) configuration/status
Use this panel to configure or display the bridge parameters for the Spanning Tree Algorithm.