Filter
Top Products
Intel® Blade Server Ethernet Switch Module IXM5414E 235
Configuration update Disable
Default gateway 0.0.0.0
IP address 10.90.90.9
x
, where
x
depends on the
number of the bay into
which you have
installed the switch
module.
Subnet mask 255.255.255.0
Configuration
System Contact Blank config syscontact
System Location Blank config syslocation
System Name Blank config sysname
Forwarding
Database
Forwarding Database
aging time
300 seconds config forwardingdb
agetime
Port
Configuration
Auto Negotiation Enable config port autoneg
Flow control Disable config port flowcontrol
LACP mode Disable config port lacpmode
Port Enable Enable config port adminmode
Mirroring
Mirroring Mode Disable config mirroring mode
Network
Connectivity
IP connectivity
parameters
10.90.90.9x
255.255.255.0 0.0.0.0
config network parms
IP connectivity
protocol
None config network protocol
Java enable status Enable config network
javamode
Web enable status Enable config network
webmode
SNMPcommunit
y
Table 9. Default settings for run-time switching software variables (continued)
Heading
Sub-
heading Variable Default value Command