Filter
Top Products
Intel® Blade Server Ethernet Switch Module IXM5414E 67
Control Mode
Displays whether flow control is Enabled or Disabled on this port.
The following displays the right side of the panel. Descriptions of these fields follow.
LACP Mode
Displays whether Link Aggregation Control Protocol (LACP) is Enabled or
Disabled on this port.
Physical Mode
Displays the selected port speed and duplex mode. If auto-negotiation support is
selected, then the duplex mode and speed will be set by the auto-negotiation
process. Note that the port's maximum capability will be advertised. Otherwise, you
must enter the port’s speed and duplex mode manually. The factory default is auto.
Physical Status
Indicates the current port speed and duplex mode.
Link Status
Indicates whether the link is Up or Down.
Link Trap
Indicates whether or not a trap will be sent when link status changes. The factory
default is Enabled.
ifIndex
Indicates the ifIndex of the interface table entry associated with this port.
Mirroring
This panel displays the port mirroring information for the switch module.