Filter
Top Products
202 Intel® Blade Server Ethernet Switch Module IXM5414E
Default disable
Format config vlan mcaststorm <1-4094> <enable/disable> [packets per second]
config vlan name
Use this command to change the name of a VLAN. The name is an alphanumeric string of up to 16
characters, and the number identifies an existing VLAN.
Default The name for VLAN ID 1 is always Default. The default name for other VLANs is
a blank string.
Format config vlan name <name> <2-4094>
config vlan participation
Use this command to configure the degree of participation for a specific interface in a VLAN. The
number identifies an existing VLAN, and the parameter <port/listofports/all> indicates the port or
ports to be affected.
Format config vlan participation <exclude/include/auto> <1-4094> <port/listofports/all>
Participation options are:
include The interface is always a member of this VLAN. This is equivalent to registration
fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface will
not participate in this VLAN unless a join request is received on this interface. This
is equivalent to registration normal.
config vlan port acceptframe
Use this command to configure the frame acceptance mode for the specified port(s). Possible values
are:
all Both tagged and untagged frames are accepted. Untagged frames will be assigned the PVID
and default priority configured for the port(s) for this VLAN.
vlan Untagged frames are discarded.
With either option, VLAN tagged packets are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
Default all
Format config vlan port acceptframe <all/vlanonly> <port/listofports/all>
config vlan port priority
Use this command to change the default IEEE 802.1p port priority assigned to untagged frames
received on the specified port(s) for the specified VLAN.
Default 0
Format config vlan port priority <0-7> <port/listofports/all>
config vlan port pvid
Use this command to change the VLAN ID that the specified port(s) will assign to untagged frames
if untagged frames are accepted.