Filter
Top Products
Intel® Blade Server Ethernet Switch Module IXM5414E 51
Click the Apply button to update the switch with new values. If you want the switch to retain the
new values across a power cycle you must perform a save.
Telnet
Use this panel to configure Telnet settings.
Telnet Login Timeout (minutes)
Specify how many minutes of inactivity should occur on a Telnet or SSH session
before the switch logs off. A zero means there will be no timeout. You may enter
any number from 0 to 160. The factory default is 5.
Maximum Number of Telnet Sessions
Use the pull-down menu to select how many simultaneous Telnet and SSH sessions
will be allowed. The maximum is 5, with 5 being the factory default.
Allow New Telnet Sessions
Indicates whether new Telnet sessions are allowed. If you set this to no, new Telnet
and SSH sessions will not be allowed. The factory default is yes.
Click the Apply button to update the switch with new values. If you want the switch to retain the
new values across a power cycle you must perform a save.
User accounts
Use this panel to reconfigure an existing user account or to create a new one. This panel is only
available for the user with Read/Write privileges, herein referred to as admin.