Intel IXM5414E Switch User Manual


 
Intel® Blade Server Ethernet Switch Module IXM5414E 175
Packets Received 1519-1522 Octets
The total number of packets (including bad packets) received that were between
1519 and 1522 octets in length (excluding framing bits but including FCS octets).
Packets Received >1522 Octets
The total number of packets (including bad packets) received that were >1522
octets in length (excluding framing bits but including FCS octets).
Packets Received Successfully
Total Packets Received Without Error
The total number of packets received that were without error.
Unicast Packets Received
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Multicast Packets Received
The number of packets received that were directed to a multicast address. Note that
this number does not include packets directed to the broadcast address.
Broadcast Packets Received
The number of packets received that were directed to a broadcast address. Note that
this number does not include packets directed to the multicast address.
Packets Received with MAC Errors
Total Packets Received with MAC Errors
The total number of inbound packets that contained errors that prevented them from
being delivered to a higher-layer protocol.
Jabbers Received
The total number of packets received that were longer than 1518 octets (excluding
framing bits, but including FCS octets), and had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error). Note that this definition of jabber
is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and
section 10.3.1.4 (10BASE2). These documents define jabber as the condition where
any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and
150 ms.
Fragments/Undersized Received
The total number of packets received that were less than 64 octets in length
(excluding framing bits but including FCS octets).
Alignment Errors
The total number of packets received that had a length (excluding framing bits but
including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad
Frame Check Sequence (FCS) with a non-integral number of octets.
Rx FCS Errors
The total number of packets received that had a length (excluding framing bits but
including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad
Frame Check Sequence (FCS) with an integral number of octets.
Received Packets Not Forwarded
802.3x Pause Frames Received
A count of MAC Control frames received on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the