Filter
Top Products
Intel® Blade Server Ethernet Switch Module IXM5414E 145
Traffic Class
Select Create from the pull-down menu to configure a new Traffic Class, or select one of the
existing classes to display and update its configuration.
Name
Enter the name to be given to the Traffic Class. You may enter up to 15 alpha-numeric
characters and may include the underscore _ or the dash -. You cannot change the name after
the initial configuration.
Weight
Enter the weight to be assigned to the Traffic Class. The weight must be a decimal number
from 1 to 1024.
Type The only supported type is per VLAN per Interface.
VLAN ID
Enter the ID of the VLAN to be associated with the traffic class. This is a value between 2
and 4094.
Interface
Select the interface to which the Traffic Class will be applied. The pull-down menu contains
the port identification of all interfaces for which a traffic class may be configured.
Bandwidth Profile
Select the Bandwidth Profile for the Traffic Class from the pull-down menu. The list
contains the identification of all Bandwidth Profiles in the form “name-id (min-max
Mbps)”. If you have not configured any Bandwidth Profiles the list will contain only the
default profile. This field associates a bandwidth allocation profile with a Traffic Class. The
sum of the bandwidth allocation profile minimum bandwidth of all Traffic Classes
associated with the same interface should not exceed the total bandwidth of the interface.