Filter
Top Products
54 Intel® Blade Server Ethernet Switch Module IXM5414E
Login Select the authentication login list you want to configure. Select Create to define a
new login list. When you create a new login list, Local is set as the initial
authentication method.
Login Name If you are creating a new login list, enter the name you want to assign. It can be up
to 15 alphanumeric characters long and is not case sensitive. The pull-down menus
you use to specify authentication methods only appear after you create a list by
entering a name.
Method 1 Use the pull-down menu to select the method that should appear first in the selected
authentication login list. If you select a method that does not time out as the first
method, such as local, no other method will be tried, even if you have specified
more than one method. Note that this parameter will not appear when you first
create a new login list. The options are:
Local
The user's locally stored ID and password will be used for authentication.
Radius
The user's ID and password will be authenticated using the RADIUS server
instead of locally.
Reject
The user is never authenticated.
Undefined
The authentication method is unspecified (this may not be assigned as the
first method).
Method 2 Use the pull-down menu to select the method, if any, that should appear second in
the selected authentication login list. This is the method that will be used if the first
method times out. If you select a method that does not time out as the second
method, the third method will not be tried. Note that this parameter will not appear
when you first create a new login list.
Method 3 Use the pull-down menu to select the method, if any, that should appear third in the
selected authentication login list. Note that this parameter will not appear when you
first create a new login list.
Click the Apply button to cause the changes made on this screen to take effect on the switch. If you
want the switch to retain the new values across a power cycle, you must perform a save.
Click the Delete button to remove the selected authentication login list from the configuration. The
delete will fail if the selected login list is assigned to any user (including the default user) for system
login or IEEE 802.1X port access control. You can only use this button if you have Read/Write
access.
Login session
This panel displays the details for all user login sessions.