Filter
Top Products
102 Intel® Blade Server Ethernet Switch Module IXM5414E
Port Select the port you want to configure from the pull-down list, or select all ports.
Port GVRP Mode
Specify the GVRP administrative mode for the port by selecting Enable or Disable from the
pull-down menu. If you select Disable, the protocol will not be active and the Join Time,
Leave Time and Leave All Time will have no effect. The factory default is Disable.
Port GMRP Mode
Specify the GMRP administrative mode for the port by selecting Enable or Disable from the
pull-down menu. If you select Disable, the protocol will not be active, and Join Time, Leave
Time and Leave All Time have no effect. The factory default is Disable.
Join Timer (centisecs)
Specify the time between the transmission of GARP PDUs registering (or re-registering)
membership for a VLAN or multicast group in centiseconds. Enter a number between 10
and 100 (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). An
instance of this timer exists for each GARP participant for each port.
Leave Timer (centisecs)
Specify the time to wait after receiving an unregister request for a VLAN or multicast group
before deleting the associated entry, in centiseconds. This allows time for another station to
assert registration for the same attribute in order to maintain uninterrupted service. Enter a
number between 20 and 600 (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6
seconds). An instance of this timer exists for each GARP participant for each port.
Leave All Timer (centisecs)
The Leave All Timer controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. The Leave All Period Timer is set to a random value
in the range of LeaveAllTime to 1.5*LeaveAllTime. The timer is specified in centiseconds.
Enter a number between 200 and 6000 (2 to 60 seconds). The factory default is 1000