Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-37
(7) Making copies when copy management is turned
ON
When copy management is turned ON, copying will only be possible
when a valid department ID-code is entered.
IMPORTANT!
Once you are finished copying, BE SURE to press the [Management]
key so that the “Enter ID-code” screen is displayed again.
1
Use the numeric keys on the keypad to enter your
department ID-code, and then touch the “Enter” key.
The “Basic” screen will be displayed.
Inch specifications
Clear
Enter
Each Mgt.
Total
Enter ID-code.
****
Metric specifications
Clear
Enter
Each Mgt.
Total
Enter ID-code.
****
NOTES
• If you enter the wrong ID-code, touch the “clear” key and reenter the
correct ID-code.
• If an invalid (unregistered) department ID-code is entered, an error
alarm will sound. Enter the correct ID-code.
• If you enter your department ID-code and touch the “Each Mgt.
Total” key, you can check the copy counts for your own department.
Inch specifications
Close
Each Management Total
Default setting - Management 1st Sales Dept.
Number print.
Number in( )
is limit value
50 30 80
100 100
Copy Printer
Scanner Fax
Total
Scan.Transm. Fax Transm.
Black & White:
Scan # pages: Trsm. # pages:
Commun.Time:
1Hrs 10Mins
Metric specifications
Close
Each Management Total
Default setting - Management 1st Sales Dept.
Number print.
Number in( )
is limit value
50 30 80
100 100
Copy Printer
Scanner Fax
Total
Scan.Transm. Fax transm.
Black & White:
Scan # pages: Trsm. # pages:
Commun.Time:
1Hrs 10Mins
2
Perform the desired copy operation as usual.
3
Once you are finished copying, press the [Management] key.