Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-60
Default setting
Cover drawer[cassette]
Default magnification
ratio
Auto exposure
adjustment
Auto exposure
adjustment (OCR)
Manual exposure
adjustment (text+photo
mode)
Manual exposure
adjustment (text mode)
Manual exposure
adjustment (photo
mode)
Sort/Finished mode ON/
OFF
Auto Rotation mode
Margin width
Description
Sets which drawer[cassette] will be used to feed the
cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
* The setting for drawer[cassette] No.3 and No.4 will
only be available when the optional Paper Feeder
is installed on your copier.
Sets whether or not the auto magnification selection
mode will be used to automatically calculate the
appropriate magnification ratio when you select the
size of copy paper.
Adjusts the overall exposure level for the auto
exposure mode.
Adjusts the overall exposure level for scanning with
OCR (Optical Character Recognition) software when
using the optional scanner functions of this copier.
Adjusts the median exposure value when the
text+photo mode is selected for the image quality.
Adjusts the median exposure value when the text
mode is selected for the image quality.
Adjusts the median exposure value when the photo
mode is selected for the image quality.
Determines whether or not the Sort and/or the
Finished modes will be the default setting in the
initial mode.
Determines whether or not the Auto Rotation mode
will be the default setting in the initial mode. If Auto
Rotation is turned ON, the image will be
automatically rotated even if the orientation of the
original is different from that of the paper loaded in
the drawers[cassettes].
Determines the default value of the location and
width of the margins in the margin mode.
Available settings
1st paper
2nd paper
3rd paper
4th paper
Bypass
Manual / AMS
-3 – +3
-3 – +3
-3 – +3
-3 – +3
-3 – +3
Sort mode :
On / Off
Finished mode :
Off / On [1 set (Output
each page) ]
Rotate / No Rotate
Inch specification
0 – 3/4 (inches)
Metric specification
0 – 18 (mm)
Factory
setting
Bypass
Manual
Standard setting
(0)
Standard setting
(0)
Standard setting
(0)
Standard setting
(0)
Standard setting
(0)
Sort mode :
On
Finished mode :
Off
Rotate
Inch
specification
Left: 1/4 (inches)
Top: 0 (inches)
Metric
specification
Left: 6 (mm)
Top: 0 (mm)
Reference
page
7-71
7-72
7-73
7-74
7-75
7-76
7-77
7-78
7-79
7-80