Section 7 COPIER MANAGEMENT FUNCTIONS
7-40
Default setting
Auto sleep time
Auto low power time
Copy eject location
Fax eject location
Default operation mode
Description
Sets the amount of time that will elapse before the auto
sleep function engages and turns the copier OFF (O) if
no operation is performed on the copier during that time.
* It is recommended that you try to set a longer time
interval before the auto sleep function engages if you
use the copier frequently, and to a shorter time if there
are long intervals between use.
*For more detailed information on the auto sleep
function, see page 4-11.
Sets the amount of time that will elapse before the Low
Power mode is automatically activated if no operation is
performed on the copier during that time.
*For more detailed information on the Low power mode,
see page 4-11.
Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
Document Finisher, Built-in Finisher or Job Separator
is installed on your copier.
* The available location for ejection will differ depending
upon the optional equipment that is installed on your
copier.
Sets the location for the ejection of received faxes.
* This setting will only be displayed when the optional
Fax Kit and Document Finisher (or the Built-in Finisher
or Job Separator) are installed on your copier.
* The available location for ejection will differ depending
upon the optional equipment that is installed on your
copier.
Sets which operation mode, the copy operation mode or
the fax operation mode, will be selected when the power
is turned on to the copier.
Available
settings
1, 5, 15, 30, 45, 60,
90, 120, 180, 240
(minutes)
1, 5, 15, 30, 45, 60,
90, 120, 180, 240
(minutes)
Inner tray
Job separator
Finisher tray
Finisher main tray
Finisher sub tray
Inner tray
Job separator
Finisher tray
Finisher main tray
Finisher sub tray
Mailbox 1
Copy mode
FAX mode
Factory
setting
60 (minutes)
15 (minutes)
Inner tray
Inner tray
Copy mode
Reference
page
7-47
7-48
7-49
7-50
7-51