Filter
Top Products
Chapter 6: USB Profiles
112
Mouse Modes when Using the Mac OS-X USB Profile with a
DCIM-VUSB
If you are using a DCIM-VUSB, using a Mac OS-X
®
USB profile, and
running Mac OS-X 10.4.9 (or later), when you reboot you must be in
Single Mouse mode to use the mouse at the Boot menu.
To configure the mouse to work at the Boot menu:
1. Reboot the Mac and press the Option key during the reboot to open
the Boot menu. The mouse will not respond at this point.
2. Select Intelligent Mouse mode and then select Single Mouse mode.
The mouse will respond.
Note: Mouse speed may be slow while in Single Mouse mode.
3. Once you are out of the Boot menu and have booted to the operating
system, exit Single Mouse mode and switch back to Absolute Mouse
mode for better mouse performance.