Filter
Top Products
Chapter 8: Device Management
152
Configuring Event Management - Destinations
System events, if enabled, can generate SNMP notification events
(traps), or can be logged to syslog or audit log. Use the Event
Management - Destinations page to select which system events to track
and where to send this information.
Note: SNMP traps will only be generated if the SNMP Logging Enabled
option is checked; Syslog events will only be generated if the Enable
Syslog Forwarding option is checked. Both of these options are in the
Event Management - Settings page. See Event Management - Settings
(see "Configuring Event Management Settings" on page 150).
To select events and their destinations:
1. Choose Device Settings > Event Management - Destinations. The
Event Management - Destinations page opens.
System events are categorized by Device Operation, Device
Management, Security, User Activity, and User Group Administration.
2. Check the checkboxes for those event line items you want to enable
or disable, and where you want to send the information.
Tip: Enable or disable entire categories by checking or clearing the
category line checkboxes, respectively.
3. Click OK.
To reset to factory defaults:
Click the Reset To Defaults button.