Filter
Top Products
Chapter 8: Device Management
147
3. Click OK.
Configuring Modem Settings
To configure modem settings:
1. Click Device Settings > Modem Settings to open the Modem Settings
page.
2. Check Enable Modem, if needed.
3. Enter the PPP server IP address. The internet address assigned to
the KSX II when a connection is established via dial-up. Required.
4. Enter the PPP client IP address. The internet address the KSX II
assigns to remove the client when a connection is established via
dial-up. Required
Note: The PPP server IP address and PPP Client IP address must
be different and cannot conflict with the network addresses used by
the server or the client.
5. Check Enable Modem Dialback, if needed.
Note: If dial-back is enabled, each user accessing the KSX II via
modem must have a call-back number defined in their profile.
Otherwise, dial-up will reject the call for that user.
6. Click OK to commit your changes or click Reset to Defaults to return
the settings to their defaults.