Filter
Top Products
136
In This Chapter
Network Settings ................................................................................... 136
Device Services ..................................................................................... 141
Configuring Modem Settings ................................................................. 147
Configuring Date/Time Settings ............................................................ 148
Event Management ............................................................................... 149
Configuring Ports ................................................................................... 155
Port Keywords ....................................................................................... 186
Port Group Management ....................................................................... 188
Network Settings
Use the Network Settings page to customize the network configuration
(for example, the IP address, discovery port, and LAN interface
parameters) for your KSX II.
There are two options available to set up your IP configuration:
None (default) - This is the recommended option (static IP). Since
the KSX II is part of your network infrastructure, you most likely do
not want its IP address to change frequently. This option allows you
to set the network parameters.
DHCP - With this option, the IP address is automatically assigned by
a DHCP server.
To change the network configuration:
1. Choose Device Settings > Network. The Network Settings page
opens.
2. Update the Network Basic Settings. See Network Basic Settings.
3. Update the LAN Interface Settings. See LAN Interface Settings.
4. Click OK to set these configurations. If your changes require
rebooting the device, a reboot message appears.
To reset to factory defaults:
Click Reset to Defaults.
Note: Both IPv4 and IPv6 addresses are supported.
Chapter 8
Device Management