Filter
Top Products
Appendix A: Specifications
282
Port
Description
HTTP, Port 80
This port can be configured as needed. See HTTP and HTTPS Port
Settings (on page 142). By default, all requests received by the KSX II
via HTTP (port 80) are automatically forwarded to HTTPS for complete
security. The KSX II responds to Port 80 for user convenience, relieving
users from having to explicitly type in the URL field to access the KSX
II, while still preserving complete security.
HTTPS, Port 443
This port can be configured as needed. See HTTP and HTTPS Port
Settings (on page 142). By default, this port is used for multiple
purposes, including the web server for the HTML client, the download
of client software (MPC/VKC) onto the client's host, and the transfer of
KVM and virtual media data streams to the client.
KSX II (Raritan
KVM-over-IP)
Protocol,
Configurable Port
5000
This port is used to discover other Dominion devices and for
communication between Raritan devices and systems, including
CC-SG. By default, this is set to Port 5000, but you may configure it to
use any TCP port not currently in use. For details on how to configure
this setting, see Network Settings.
SNTP (Time Server)
on Configurable
UDP Port 123
The KSX II offers the optional capability to synchronize its internal clock
to a central time server. This function requires the use of UDP Port 123
(the standard for SNTP), but can also be configured to use any port of
your designation. Optional
LDAP/LDAPS on
Configurable Ports
389 or 636
If the KSX II is configured to remotely authenticate user logons via the
LDAP/LDAPS protocol, ports 389 or 636 will be used, but the system
can also be configured to use any port of your designation. Optional
RADIUS on
Configurable Port
1812
If the KSX II is configured to remotely authenticate user logons via the
RADIUS protocol, either port 1812 will be used, but the system can also
be configured to use any port of your designation. Optional
RADIUS Accounting
on Configurable Port
1813
If the KSX II is configured to remotely authenticate user logons via the
RADIUS protocol, and also employs RADIUS accounting for event
logging, port 1813 or an additional port of your designation will be used
to transfer log notifications.
SYSLOG on
Configurable UDP
Port 514
If the KSX II is configured to send messages to a Syslog server, then
the indicated port(s) will be used for communication - uses UDP Port
514.
SNMP Default UDP
Ports
Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps. Optional
TCP Port 21
Port 21 is used for the KSX II command line interface (when you are
working with Raritan Technical Support).