Filter
Top Products
Chapter 3: Working with Target Servers
77
4. Exit Full Screen Mode - Hotkey. When you enter Full Screen mode,
the display of the target server becomes full screen and acquires the
same resolution as the target server. This is the hot key used for
exiting this mode.
5. Exit Single Cursor Mode - Hotkey. When you enter single cursor
mode, only the target server mouse cursor is visible. This is the hot
key used to exit single cursor mode and bring back the client mouse
cursor. Click OK.
6. Client Launch Settings
7. Select the Client Launch Settings tab.
a. To configure the target window settings:
Select 'Standard - sized to target Resolution' to open the window
using the target's current resolution. If the target resolution is
greater than the client resolution, the target window covers as
much screen area as possible and scroll bars are added (if
needed).
Select Full Screen to open the window in full screen mode.
a. To configure the monitor on which the target viewer is launched:
Select 'Monitor Client Was Launched from' if you want the target
viewer to be launched using the same display as the application
that is being used on the client (for example, a web browser or
applet).
8. Use Select From Detected Monitors to select from a list of target
monitors that are currently detected by the application. If a previously
selected monitor is no longer detected, 'Currently Selected Monitor
Not Detected' is displayed.
9. Click OK.
Keyboard Limitations
Slovenian Keyboards
The < key does not work on Slovenian keyboards due to a JRE
limitation.
Language Configuration on Linux
Because the Sun JRE on Linux has problems generating the correct Key
Events for foreign-language keyboards configured using System
Preferences, Raritan recommends that you configure foreign keyboards
using the methods described in the following table.
Language
Configuration method
US Intl
Default
French
Keyboard Indicator
German
System Settings (Control Center)