Filter
Top Products
Chapter 8: Device Management
148
Configuring Date/Time Settings
Use the Date/Time Settings page to specify the date and time for the
KSX II. There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time Protocol (NTP)
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. To adjust for daylight savings time, check the "Adjust for daylight
savings time" checkbox.
4. Choose the method you would like to use to set the date and time:
User Specified Time - Choose this option to input the date and
time manually.
For the User Specified Time option, enter the date and time. For
the time, use the hh:mm format (using a 24-hour clock).
Synchronize with NTP Server - Choose this option to synchronize
the date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional