Filter
Top Products
86
In This Chapter
Overview .................................................................................................. 86
Turning Outlets On/Off and Cycling Power ............................................. 87
Overview
The KSX II allows you to control Raritan PX and RPC series rack PDU
(power strip) outlets. Once a PX or RPC series is setup and then
attached to the KSX II, the rack PDU and its outlets can be controlled
from the Powerstrip page in the KSX II interface. This page is accessed
by clicking on the Power menu at the top of the page.
The Powerstrip page will display rack PDUs attached to the KSX II for
which the user has been granted appropriate port access permissions.
Note: For information on setting up a PX, see the Dominion PX User
Guide.
From the Powerstrip page, you are able to turn the outlets on and off, as
well as cycle their power. You are also able to view the following power
strip and outlet information:
Powerstrip Device Information:
Name
Model
Temperature
Current Amps
Maximum Amps
Voltage
Power in Watts
Power in Volts Ampere
Outlet Display Information:
Name - Named assigned to the outlet when it was configured.
State - On or Off status of the outlet.
Control - Turn outlets on or off, or cycle their power.
Association - The ports associated with the outlet.
Chapter 4
Rack PDU (Power Strip) Outlet
Control