Filter
Top Products
Chapter 3: Working with Target Servers
38
KSX II Remote Console Interface
The KSX II Remote Console is a browser-based graphical user interface
that allows you to log in to KVM target servers and serial targets
connected to the KSX II and to remotely administer the KSX II.
The KSX II Remote Console provides a digital connection to your
connected KVM target servers. When you log into a KVM target server
using the KSX II Remote Console, a Virtual KVM Client window opens.
There are many similarities among the KSX II Local Console and the
KSX II Remote Console graphical user interfaces, and where there are
differences, they are noted in the user manual. The following options are
available in the KSX II Remote Console but not the KSX II Local
Console:
Virtual Media
Favorites
Backup/Restore
Firmware Upgrade
Upgrade Report
SSL Certificates
Note: If you are using Internet Explorer
®
7, you may run into permission
issues when trying to connect to a target server. To avoid this, do the
following:
1. In Internet Explorer, click Tools > Internet Options to open the Internet
Options dialog.
2. In the "Temporary Internet files" section, click the Settings button. The
Settings dialog opens.
3. In the "Check for newer versions of stored pages" section, select
Automatically.
4. Click OK to apply the settings.
Launching the KSX II Remote Console
Important: Regardless of the browser used, you must allow
pop-ups from the device's IP address to launch the KSX II Remote
Console.