Filter
Top Products
Chapter 8: Device Management
141
Device Services
The Device Services page allows you to configure the following
functions:
Enabling Telnet
Enabling SSH access
Configuring HTTP and HTTPs port settings
Enabling Serial Console Access
Configuring the discovery port access
Enabling direct port access
Enabling the AKC Download Server Certificate Validation feature if
you are using AKC
Enabling Telnet
If you wish to use Telnet to access the KSX II, first access the KSX II
from the CLI or a browser.
To enable Telnet:
1. Select Device Settings > Device Services and then select the Enable
TELNET Access checkbox.
2. Enter the Telnet port.
3. Click OK.
Once Telnet access is enabled, you can use it to access the KSX II and
set up the remaining parameters.
Enabling SSH
Enable SSH access to allow administrators to access the KSX II via the
SSH v2 application.
To enable SSH access:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Select Enable SSH Access.
3. Enter the SSH Port information. The standard SSH TCP port number
is 22 but the port number can be changed to provide a higher level of
security operations.
4. Click OK.