Filter
Top Products
Chapter 8: Device Management
176
Supported CIMs for Blade Chassis
The following CIMs are supported for blade chassis being managed
through the KSX II:
DCIM-PS2
DCIM-USBG2
D2CIM-VUSB
D2CIM-DVUSB
Following is a table containing supported CIMs for each blade chassis
model that the KSX II supports.
Blade chassis
Connection method
Recommended CIM(s)
Generic
If a D2CIM-VUSB or D2CIM-DVUSB is
used when connecting to a
blade-chassis configured as Generic,
you will be able to select the USB
profiles from the Port Configuration
page and the client's USB Profile menu.
However, virtual media is not supported
for generic blade chassis and the Virtual
Media menu is disabled on the client.
DCIM-USBG2
Dell
®
PowerEdge
™
1855
Includes one of the three KVM modules
:
Analog KVM Ethernet switch
module (standard)
Digital Access KVM switch module
(optional)
KVM switch module (standard on
systems sold prior to April, 2005)
These switches provide a custom
connector that allows two PS/2 and one
video device to be connected to the
system.
Source: Dell PowerEdge 1855 User
Guide
DCIM-PS2
Dell PowerEdge 1955
One of two types of KVM modules may
be installed:
Analog KVM switch module
Digital Access KVM switch module
Both modules enable you to connect a
PS/2-compatible keyboard, mouse and
video monitor to the system (using a
DCIM-PS2