Filter
Top Products
Chapter 7: User Management
132
Returning User Group Information via RADIUS
When a RADIUS authentication attempt succeeds, the KSX II
determines the permissions for a given user based on the permissions of
the user's group.
Your remote RADIUS server can provide these user group names by
returning an attribute, implemented as a RADIUS FILTER-ID. The
FILTER-ID should be formatted as follows: Raritan:G{GROUP_NAME}
where GROUP_NAME is a string denoting the name of the group to
which the user belongs.
Raritan:G{GROUP_NAME}:D{Dial Back Number}
where GROUP_NAME is a string denoting the name of the group to
which the user belongs and Dial Back Number is the number associated
with the user account that the KSX II modem will use to dial back to the
user account.
RADIUS Communication Exchange Specifications
The KSX II sends the following RADIUS attributes to your RADIUS
server:
Attribute
Data
Log in
Access-Request (1)
NAS-Port-Type (61)
VIRTUAL (5) for network connections.
NAS-IP-Address (4)
The IP address for the KSX II.
User-Name (1)
The user name entered at the login screen.
Acct-Session-ID (44)
Session ID for accounting.
User-Password(2)
The encrypted password.
Accounting-Request(4)
Acct-Status (40)
Start(1) - Starts the accounting.
NAS-Port-Type (61)
VIRTUAL (5) for network connections.
NAS-Port (5)
Always 0.
NAS-IP-Address (4)
The IP address for the KSX II.
User-Name (1)
The user name entered at the login screen.
Acct-Session-ID (44)
Session ID for accounting.