Filter
Top Products
Chapter 9: Security Management
195
Encryption & Share
Using the Encryption & Share settings you can specify the type of
encryption used, PC and VM share modes, and the type of reset
performed when the KSX II Reset button is pressed.
WARNING: If you select an encryption mode that is not supported by
your browser, you will not be able to access the KSX II from your
browser.
1. Choose one of the options from the Encryption Mode drop-down list.
When an encryption mode is selected, a warning appears, stating
that if your browser does not support the selected mode, you will not
be able to connect to the KSX II. The warning states "When the
Encryption Mode is specified please ensure that your browser
supports this encryption mode; otherwise you will not be able to
connect to the KSX II."
Encryption mode
Description
Auto
This is the recommended option. The KSX II
autonegotiates to the highest level of
encryption possible.
You must select Auto in order for the device
and client to successfully negotiate the use of
FIPS compliant algorithms.
RC4
Secures user names, passwords and KVM
data, including video transmissions using the
RSA RC4 encryption method. This is a
128-bit Secure Sockets Layer (SSL) protocol
that provides a private communications
channel between the KSX II device and the
Remote PC during initial connection
authentication.
If you enable FIPS 140-2 mode and RC4 has
been selected, you will receive an error
message. RC4 is not available while in FIPS
140-2 mode.
AES-128
The Advanced Encryption Standard (AES) is
a National Institute of Standards and
Technology specification for the encryption of
electronic data. 128 is the key length. When
AES-128 is specified, be certain that your
browser supports it, otherwise you will not be
able to connect. See Checking Your
Browser for AES Encryption (on page 197)
for more information.
AES-256
The Advanced Encryption Standard (AES) is