Filter
Top Products
Chapter 8: Device Management
170
Note: Leave the username and password fields blank for DRAC, ILO,
and RSA web applications or the connection will fail.
e. The Username Field and Password Field, which are both
optional, contain the labels that are expected to be associated
with the username and password entries. It is in these fields you
should enter the field names for the username and password
fields used on the login screen for the web application. You can
view the HTML source of the login screen to find the field names,
not the field labels. See Tips for Adding a Web Browser
Interface (on page 172) for tips on adding a web browser
interface.
6. If applicable, define the USB profile for the blade chassis or select an
existing USB profile. Click the USB Profiles Select USB Profiles for
Port icon or the Apply Select Profiles
to Other Ports icon to
expand these sections of the page. See Configuring USB Profiles
(Port Page) (on page 181).
7. Click OK to save the configuration.
To configure a IBM BladeCenter (Other):
1. If you selected IBM BladeCenter (Other), auto-discovery is not
available. Configure the blade chassis as applicable.
a. Switch Hot Key Sequence - Select the hot key sequence that will
be used to switch from KVM to the blade server.
b. Administrative Module Primary IP Address/Host Name - Enter
the primary IP address for the blade chassis. Not applicable.
c. Maximum Number of Slots - Enter the default maximum number
of slots available on the blade chassis.
d. Port Number - The default port number for the blade chassis is
22. Not applicable.
e. Username - Not applicable.
f. Password - Not applicable.
2. Change the blade chassis name if needed.
3. Indicate the blades that are installed in the blade chassis by
checking the Installed checkbox next to each slot that has a blade
installed. Alternatively, use the Select All checkbox. If needed,
change the blade server names. If it is not already named, the KSX II
assigns a name to the blade server. The default blade server naming
convention is # Blade_Chassis_Port#_Slot#.