Filter
Top Products
Chapter 13: KSX II Local Console
253
Note: Keyboard use for Chinese, Japanese, and Korean is for
display only. Local language input is not supported at this time for
KSX II Local Console functions.
3. Choose the local port hotkey. The local port hotkey is used to return
to the KSX II Local Console interface when a target server interface
is being viewed. The default is to Double Click Scroll Lock, but you
can select any key combination from the drop-down list:
Hot key:
Take this action:
Double Click Scroll Lock
Press Scroll Lock key twice quickly
Double Click Num Lock
Press Num Lock key twice quickly
Double Click Caps Lock
Press Caps Lock key twice quickly
Double Click Left Alt key
Press the left Alt key twice quickly
Double Click Left Shift key
Press the left Shift key twice quickly
Double Click Left Ctrl key
Press the left Ctrl key twice quickly
4. Set the Video Switching Delay from between 0 - 5 seconds, if
necessary. Generally 0 is used unless more time is needed (certain
monitors require more time to switch the video).
5. If you would like to use the power save feature:
a. Select the Power Save Mode checkbox.
b. Set the amount of time (in minutes) in which Power Save Mode
will be initiated.
6. Choose the resolution for the KSX II Local Console from the
drop-down list:
800x600
1024x768
1280x1024
7. Choose the refresh rate from the drop-down list:
60 Hz
75 Hz
8. Choose the type of local user authentication:
Local/LDAP/RADIUS. This is the recommended option. For more
information about authentication, see Remote Authentication
(on page 34).
None. There is no authentication for Local Console access. This
option is recommended for secure environments only.
9. Select the "Ignore CC managed mode on local port" checkbox if you
would like local user access to the KSX II even when the device is
under CC-SG management.