Filter
Top Products
Chapter 9: Security Management
197
Local device reset
mode
Description
Enable Local Factory
Reset (default)
Returns the KSX II device to the factory
defaults.
Enable Local Admin
Password Reset
Resets the local administrator password only.
The password is reset to raritan.
Disable All Local
Resets
No reset action is taken.
Note: When using the P2CIM-AUSBDUAL or P2CIM-APS2DUAL to
attach a target to two KSX IIs, if Private access to the targets is required,
both KVM switches must have Private set as their PC Share Mode.
See Supported Paragon CIMS and Configurations (on page 276) for
additional information on using Paragon CIMs with the KSX II.
Checking Your Browser for AES Encryption
The KSX II supports AES-256. If you do not know if your browser uses
AES, check with the browser manufacturer or navigate to the
https://www.fortify.net/sslcheck.html website using the browser with the
encryption method you want to check. This website detects your
browser's encryption method and displays a report.
Note: Internet Explorer
®
6 does not support AES 128 or 256-bit
encryption.
AES 256 Prerequisites and Supported Configurations
AES 256-bit encryption is supported on the following web browsers only:
Firefox
®
2.0.0.x and 3.0.x and higher
Internet Explorer 7 and 8
In addition to browser support, AES 256-bit encryption requires the
installation of Java
™
Cryptography Extension
®
(JCE
®
) Unlimited Strength
Jurisdiction Policy Files.
Jurisdiction files for various JREs
™
are available at the “other downloads”
section of the following link:
JRE1.6 - http://java.sun.com/javase/downloads/index_jdk5.jsp