Filter
Top Products
Chapter 8: Device Management
153
SNMP Trap Configuration
SNMP provides the ability to send traps, or notifications, to advise an
administrator when one or more conditions have been met. The following
table lists the KSX II SNMP traps:
Trap name
Description
cimConnected
A CIM is plugged into to the KSX II port.
cimDisconnected
A CIM is either unplugged from the KSX
II port or powered-off.
cimUpdateCompleted
CIM firmware update process
completed.
cimUpdateStarted
CIM firmware update process started.
configBackup
The device configuration has been
backed up.
configRestore
The device configuration has been
restored.
deviceUpdateFailed
Device update has failed.
deviceUpgradeCompleted
The KSX II has completed update via
an RFP file.
deviceUpgradeStarted
The KSX II has begun update via an
RFP file.
ethernetFailover
An Ethernet failover was detected and
restored on a new Ethernet interface.
factoryReset
The device has been reset to factory
defaults.
firmwareFileDiscarded
Firmware file was discarded.
firmwareUpdateFailed
Firmware update failed.
firmwareValidationFailed
Firmware validation failed.
groupAdded
A group has been added to the KSX II
system.
groupDeleted
A group has been deleted from the
system.
groupModified
A group has been modified.
ipConflictDetected
An IP Address conflict was detected.
ipConflictResolved
An IP Address conflict was resolved.
networkFailure
An Ethernet interface of the product can
no longer communicate over the