Filter
Top Products
Chapter 1: Introduction
4
KSX II Help
The KSX II help provides information on how to install, set up, and
configure the KSX II. It also includes information on accessing target
servers and power strips, using virtual media, managing users and
security, and maintaining and diagnosing the KSX II.
A PDF version of the help can be downloaded from the Raritan
Firmware and Documentation page
http://www.raritan.com/support/firmware-and-documentation/ on the
Raritan website. Raritan recommends that you refer to the Raritan
website for the most up-to-date user guides available.
To use online help, Active Content must be enabled in your browser. If
you are using Internet Explorer 7, you must enable Scriplets. Consult
your browser help for information on enabling these features.
Related Documentation
The KSX II help is accompanied by a KSX II Device Quick Setup Guide,
which can be found on the Raritan Firmware and Documentation page
http://www.raritan.com/support/firmware-and-documentation/ of
Raritan's website.
Installation requirements and instructions for client applications used with
the KSX II can be found in the KVM and Serial Access Clients Guide,
also found on the Raritan website. Where applicable, specific client
functions used with the KSX II are included in the help.
KSX II Client Applications
The following client applications can be used with the KSX II:
Virtual KVM Client (VKC)
Active KVM Client (AKC)
Multiplatform Client (MPC)
Raritan Serial Console (RSC)
See the KVM and Serial Client Guide for additional information on the
client applications. Also see the Working with Target Servers (on page
36) section of this guide, which contains information on using the clients
with the KSX II.
Note: MPC and VKC require the Java
™
Runtime Environment (JRE
™
).
AKC is .NET based.