Filter
Top Products
Connect Copy (Option)
232
4
Using Connect Copy
You can select Connect Copy mode from either of the two connected machines
by pressing the [Connect] key. The machine you use becomes the master unit,
and the other machine the sub-unit.
Limitation
❒ Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.
Note
❒ You can select whether the [Connect] key is displayed or not with the User
Tools. See “Connect Copy Master” in ⇒ p.311 “Count Manager”.
A
AA
A
Make sure that the machine is in Copy mode.
Note
❒ If the User Codes are turned on, enter a user code programmed in the mas-
ter unit using the number keys (maximum 8 digits) then press the [#] key.
You do not need to enter the user code for the sub-unit.
Reference
⇒ p.87 “User Codes”
B
BB
B
Press the [Connect] key on the machine that is to be the master unit.
When the key darkens, the two units are connected.
❖
❖❖
❖ Master unit display