Adjusting System Settings
39
4
Count Manager
When entering Count Manager mode, if a key operator code has already been
set, you must enter the code (up to 8 digits).
Reference
For more information about key operator code, see the “System Settings”
manual.
Tray Paper Settings
You can set the types and size of the paper set in the paper tray and make them
indicated.
You can set with the following steps.
A
Paper Type
B
Paper Color
*1
(Only for “Special Paper” or “Thick Paper”)
C
Slip Sheet Copy In Duplex Mode (Only for “Normal”, “Recycled Paper” or
“Special Paper”)
D
Paper Size (Only for Tray 2 and Tray 3)
*1
Paper Color can not be set from the printer driver, and you can not confirm the
Paper Color from the printer driver.
Reference
For more information about “Tray Paper Settings”, see the “Copy Reference”
and the “System Settings” manuals.
Menu Description
Key Operator Code If you select “Yes”, only operators who know the key operator
code (up to 8 digits) can access the User Tools (System Settings
and Copy/Document Server Features).
Note
❒ Default:
No
❒ If you select “Yes”, you should register the key operator code
and specify whether to set the key operator code on the part or
all of the default settings of the User Tools (System Settings
and Copy/Document Server Features).
• If you select “Part”, the key operator code is set on “Set
Time” and “Count Manager” of the User Tools (System
Settings and Copy/Document Server Features).
• If you select “All default settings”, the key operator code is
set on the all of the default settings of the User Tools (Sys-
tem Settings and Copy/Document Server Features).