Filter
Top Products
Connect Copy (Option)
238
4
Exiting Connect Copy Mode
This procedure describes how to exit Connect Copy mode and return to the stan-
dard copying functions.
A
AA
A
Press the [Connect] key on the master unit.
The [Connect] key will be deselected.
Note
❒ Settings that were selected on the master unit while in Connect Copy mode
will not be cleared.
❒ If you press the {
{{
{Clear Modes/Energy Saver}
}}
} key on the master unit, Connect
Copy mode is canceled and the master unit returns to the initial condition
of the Copy mode.
❒ The sub-unit will return to the state it was in prior to entering Connect
Copy mode.
Reference
If you cannot exit Connect Copy mode by pressing the [Connect] key, see
⇒ p.256 “If You Cannot Exit Connect Copy”.