Filter
Top Products
Copying
86
2
Interrupt Copy
Use this function if you wish to interrupt a long copy job to make urgently need-
ed copies.
Note
❒ The procedure for making interrupt copies depends on which kind of opera-
tion the machine is currently carrying out.
❒ You can use Document Server mode in Interrupt Copy mode.
❒ In Connect Copy mode, you cannot use the Interrupt Copy function on the
master unit.
❒ In Connect Copy mode, you cannot use the Interrupt Copy function on the
sub-unit while the master unit is scanning an original.
❒ In Connect Copy mode, you cannot use the Interrupt Copy function when
memory on the sub-unit is full.
❒ In Connect Copy mode, after finishing the interrupt copy job on the sub-unit,
be sure to exit Interrupt mode on the sub-unit. When you exit Interrupt mode,
the two machines automatically share the rest of the connect copy job.
❒ In Connect Copy mode, if the connect copy job is finished before finishing the
interrupt copy job on the sub-unit, be sure to exit Interrupt mode on the sub-
unit. If you do not exit Interrupt mode, the next connect copy job cannot be
started.
To interrupt an original being fed
A
AA
A
Press the {
{{
{Interrupt}
}}
} key.
The Interrupt indicator goes on and scanning stops.
B
BB
B
Remove the originals that were being copied and set the originals you wish
to copy.
C
CC
C
Press the {
{{
{Start}
}}
} key.
The machine starts making your copies.
D
DD
D
When your copy job is finished, remove your originals and copies.
E
EE
E
Press the {
{{
{Interrupt}
}}
} key again.
The Interrupt indicator goes off.
F
FF
F
When the display prompts you to, replace the originals that were being
copied before.
G
GG
G
Press the {
{{
{Start}
}}
} key.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.