Filter
Top Products
Copying
88
2
Reference
For how to set up the user codes, see “Set User Codes” in the System Settings
manual.
For how to register, change and delete the user codes, see “User Code Regis-
ter/Change/Delete” in ⇒ p.311 “Count Manager”.
Auto Start
If you press the {
{{
{Start}
}}
} key during the warm-up period, the {
{{
{Start}
}}
} key will
blink, and your copies will be made as soon as warm-up finishes.
A
AA
A
Make any adjustments to copy settings during the warm-up period.
B
BB
B
Set your originals.
C
CC
C
Press the {
{{
{Start}
}}
} key.
Copying automatically starts when the {
{{
{Start}
}}
} key indicator flashes red and
green and the machine is ready for copying.
Note
❒ In Connect Copy mode, copying starts when the master unit is ready for
copying.
❒ To cancel Auto Start, press the {
{{
{Clear/Stop}
}}
} key.
❒ In Connect Copy mode, press the {
{{
{Clear/Stop}
}}
} key on the master unit to
cancel Auto Start.
Original Beeper
The beeper sounds and an error message is displayed when you leave your orig-
inals on the exposure glass after copying.
Note
❒ To cancel this function, see “Original Beeper” in ⇒ p.295 “General Features
2
/
3
”.