Filter
Top Products
Settings You Can Change with the User Tools
17
1
Paper Size Setting
Menu Description
Paper Tray Priority You can select the paper tray which will be selected as a default in
the following conditions:
• When the operation switch is turned on.
• When System Reset or Auto Reset mode is turned on.
• When the {
{{
{Clear Modes/Energy Saver}
}}
} key is pressed.
• When Auto Paper Select mode is selected.
Note
❒ Default:
• Machine with LCT : LCT
• Machine without LCT : Tray 1
❒ Large capacity tray (LCT) is optional.
Tray 1:Paper Size Setting
Tray 2:Paper Size Setting
Tray 3:Paper Size Setting
Select the size of the copy paper set in the paper tray.
Note
❒ When making the paper size setting for Tray 2, the setting of
the paper size selector has priority.
❒ If the specified paper size differs from the size of paper actually
set in the paper tray, a paper misfeed might occur because the
paper size is not detected correctly.
❒ When you set the tab stock in Tray 2, specify the paper size as
follows:
• Metric version: A4K
• Inch version: 8
1
/
2
" × 11"K
❒ When you set the tab stock in Tray 2, you also need to specify
the paper type in “Tray 2: Special Paper Indication” of the User
Tools.
❒ If you wish to change the paper size set in Tray 1, Tray 3, and
the optional large capacity tray (LCT), contact your service rep-
resentative.
Reference
See “Changing the Paper Size” in the Copy Reference manual.
Tray1
Tray2
Tray3
LCT
GCTRAY0E
MojitoC2b_GBsys_F_FM.book Page 17 Wednesday, July 31, 2002 2:16 PM