Filter
Top Products
If you want a linear pattern, for n you enter here a pattern number between
1 and 6 inclusive, identifying one of the linear patterns below.
#6
You always send the following Print Pattern command after a Specify
Pattern command. This Print Pattern command identifies whether the area
you have defined is to be filled with a rule, dotted gray-scale pattern, or linear
pattern:
,<ESC>*cnP
For n enter a value from the following table. (If you select a linear pattern
here, but a dotted pattern in the previous Specify Pattern command, the
printer will ignore this Print Pattern command.)
n VALUE PATTERN
0 (zero)
solid black
1
solid (opaque) white
2 shaded fill (as selected with cESC>*c n G)
3 cross-hatched fill (as selected with <ESC>*c n G)
5 current pattern fill (as selected with <ESC>*v n T)
92