Filter
Top Products
CARE AND MAINTENANCE
• Letterhead or preprinted paper using low temperature dyes
or thermography. These materials may transfer onto the
fuser roller and cause damage. Any preprinted paper should
use inks compatible with 200
o
C for 0.1 seconds.
• Damaged or wrinkled paper, or paper with irregularities such
as tabs, staples, and so forth
• Multiple forms or carbonless paper.
Paper curl in paper loading
All paper has a curl which is created in the manufacturing
process. During the process, paper is stored on large rolls
before being cut into sheets. Once cut and packaged, it retains
some of the curl from the large storage rolls.
Xerox brand papers have an arrow printed on the end of the
ream wrapper. This arrow points in the opposite direction of the
curl. For example, in the 4213 laser printer (which requires the
curl side up), you load the paper so the arrow points down if the
wrapper were still on the ream.
Note: When you load paper in the paper tray, the curl must be
up. Otherwise, misfeeds or jams can occur.
On brands of paper other than Xerox, an arrow (if present) may
have a different significance. It is always safest and more
accurate to use the following curl test to determine the direction
of the curl.
Finding the paper curl
1. Pick up about one quarter of the paper stack and hold it by
one of the short edges.
2. Let the paper hang with the long edge parallel to your body.
5-4 XEROX 4213 LASER PRINTER USER GUIDE