Filter
Top Products
USING THE 4213 MENUS
Changing the LJ2D emulation configuration at the Main Menu
The emulation submenus list configuration options for the
resident emulations. All of the printer emulations may be
selected through the Main Menu and then set up individually to
conform to your printing needs.
This section shows which buttons on the control panel are used
for accessing the Main Menu, advancing to display the emulation,
and, if applicable, selecting emulation configuration options.
If necessary, refer to “Control panel,” in chapter 2, “Overview,”
for a diagram showing the location of the control panel buttons.
Accessing the Main Menu and selecting LJ2D
Use the following buttons at the printer control panel:
H 1. Press the Online button to take the printer off line. (The
green online indicator light is not lit.)
A 2. Immediately press and release the Menu button to display
the first Main Menu heading in the top level menu. The
display reads:
MAIN MENU
PRINTER LANGUAGE
C 3. Press the Last Page button. The display reads:
MAIN MENU
EMULATION
B 4. Press the Test button. The display reads:
EMULATION
XES*
C 5. Press the Last Page button to display LJ2D.
D 6. Press the Select button to select LJ2D. An asterisk appears
next to your selection.
XEROX 4213 LASER PRINTER USER GUIDE 3-33