Filter
Top Products
USING THE 4213 MENUS
Printer configuration at the Main Menu
Once the physical components of the printer are connected, the
printer software may be set up, or configured, to meet the needs
of your office. The printer configuration options affect the whole
system and are set through the Main Menu.
Note: Your machine is pre-configured with User Defaults which
provide parallel interface at power up. If this does not meet your
requirements, you can change the printer configuration to your
own user defaults.
Accessing the Main Menu
Use the following buttons at the printer control panel:
H 1. Press the Online button to take the printer off line. (The
green Online indicator light is not lit.)
A 2. Immediately press and release the Menu button to display
the first Main Menu heading in the top level menu.
The display reads:
MAIN MENU
PRINTER LANGUAGE
By configuring your printer, you are establishing your own default
settings. There are two types of changes to the system
configuration:
• Permanent settings which remain unchanged even through a
power off and on cycle
• Temporary settings remain current until a software command
to change the setting is received, or the printer is switched
off.
Saving the printer configuration as defaults
You must exit the Main Menu and access the Reset Menu to save
your selections as the default configuration for the printer.
3-4 XEROX 4213 LASER PRINTER USER GUIDE