Filter
Top Products
POSTSCRIPT EMULATION
Change the printer emulation
You must change the printer emulation to PostScript in order to
use the PDL option. Refer to the following steps.
1. Turn on the printer. The message display reads:
READY
H 2. At the printer control panel, press the Online button to take
the printer off line. (The green online indicator light is not
lit.)
A 3. Press and release the Menu button to display the first Main
Menu heading in the top level menu. The display reads:
MAIN MENU
PRINTER LANGUAGE
C 4. Press the Last Page button until the display reads:
MAIN MENU
EMULATION
B 5. Press the Test button. The display reads:
EMULATION
XES
C 6. Press the Last Page button until the display reads:
EMULATION
PS
D 7. Press the Select button to select PostScript as the emulation
option.
H 8. Press the Online button to put the printer back online. (The
green online indicator light is lit.)
For detailed instructions on printing, refer to chapter 4, “Printing
with the 4213.”
A4-12 XEROX 4213 LASER PRINTER USER GUIDE