Filter
Top Products
USING THE 4213 MENUS
The options in the Output Offset menu are listed below as they
appear in the message display:
OUTPUT OFFSET
DISABLED* (DISABLED or ENABLED)
Auto Continue
The Auto Continue menu item allows you to choose whether the
printer continues printing automatically when a communication
error occurs.
If the Auto Continue option is disabled, the printer pauses and
does not resume printing when an error occurs.
If the Auto Continue option is enabled, the printer logs the
errors and then automatically continues printing.
If the printer is shared by many users, you may not want the
inconvenience of a paused print job.
The Auto Continue menu item options are listed below as they
appear in the message display:
AUTO CONTINUE
DISABLED* (DISABLED or ENABLED)
Host Interface
Through the Host Interface menu, select serial (RS232C) or
parallel (Centronics or DataProducts) interface when
communicating with your host computer.
Serial and parallel Centronics communication uses special
communication parameters. Refer to your host computer
software manuals for details and make sure your computer and
the 4213 laser printer are using identical settings for each of the
serial and parallel Centronics parameters.
The optional interface connection, Xerox Coax/Twinax, is
available for the 4213 laser printer. Refer to appendix A,
“Options for the 4213,” for more information on this interface
option.
XEROX 4213 LASER PRINTER USER GUIDE 3-11