Filter
Top Products
XEROX COAX/TWINAX OPTION
2. Use either of the following buttons to exit the Main Menu:
A • Use the Menu button until OFF LINE appears in the
message display. The printer is off line. The online
indicator light is not lit.
H • Use the Online button. The printer is online (ready-to-
accept-data) and any configuration changes made using
this menu are in effect. The online indicator light is lit.
Notes
• Care must be taken when exiting to the Main Menu after
changing option settings for the IBM Comms menu. This is
because if you put the 4213 back online, you will lose all
new option settings not associated with the IBM Comms,
unless you have previously saved them using the “Saving user
defaults” option.
• Again, you must use the SAVE DEFAULTS option to save any
changes made to the printer configuration settings if you
wish these settings to be permanent and active each time the
system is switched on. Otherwise, when your system is
switched off and then on again, the configuration returns to
the configuration that was previously saved. Refer to “Saving
User Defaults” section in this guide.
Using IBM Coax Utility Menus
This section shows how to use the IBM utilities and provides
samples of the expected printed outputs.
Printing a Coax configuration sheet
Use the following buttons at the printer control panel to print a
Coax configuration sheet:
H 1. Press the Online button to take the printer off line. (The
green online indicator light is not lit.)
XEROX 4213 LASER PRINTER USER GUIDE A3-43