POSTSCRIPT EMULATION
PDL board installation
For steps 11 to 13, refer to figure A4-4.
Figure A4-4. Align the PDL board for installation
1. Connector J16
2. Mounting pegs inserted in holes
3. PDL board2
11. Locate the connector on the PDL board at J16.
12. Align the connector of the PDL board (J16) with the
connector on the system controller board (J16). Push down
on the outer corners of the PDL board above this connector
until the connector is fully seated.
A4-6 XEROX 4213 LASER PRINTER USER GUIDE